Jump to content
Sign in to follow this  

[SOLD] [QLD] '92 Black Project Roller $2.2k

Recommended Posts

Looking at selling my G-tir unfinished ☹☹


As I just don't have time to finish it off, a lot has been done;


engine has been sleeved using darton sleeves then bored to a 2.2 liter

cp pistons,

eagle rods,

cosworth head gasket,

272 cams,

arp studs though out engine,

1350cc Bosch injectors,

single ross machine racing 90mm throttle body,

wilwood front brakes,

wilwood 1inch bore m/c,

ppg gearing 1st to 4th with standard 5th,

tein ss suspension lots more done.


Comes with heaps of other parts pm for more details .


Nigel 0421711415 


Located Queensland




Rego: 215GQQ

VIN: RNN14-052890 / 6T91MPAAAN2ENJ003

KM: 113000 (chassis) 0km on engine



Previous ad: https://www.gtiroz.net/topic/11748-sold-qld-92-black-running-3-out-of-4-cyls-28k/










Share this post

Link to post

Engine was bored out. darton sleeves put in sleeves bored to 90.5mm so now 2.2 liter, cp pistons, eagle rods aclbearings, arpstuds though out, crank knife edged, 272 cams, duel springs, titianum retainers, single 90mm Ross machine racing throttle body, ppg gearing 1st to 4th with standard 5th, distributor delete kit plus other lol

Share this post

Link to post

Price drop - $10k


High build unfinished project,


Forged Engine has been bored out to a 2.2 liter using darton sleeves, cp pistions, eagle rods, custom plenum with a 90mm Ross machine racing throttle body, ppg geared box 1st to 4th with standard 5th exedy clutch (new), tein ss suspension, wilwood front brakes, car is being rewired with a haltech elite 1500 premium loom no ECU, a lot of custom parts including cold air induction though good scoop, fog light grill, front bash plate 


Needs wiring, exhaust manifold (new proboost gtx3582r turbo included) piping work and tidying up


May consider SWAPS for a 4x4


$11,000 located browns plains


This is a 700hp capable car $30,000 plus has been put into this car already



Share this post

Link to post

Price drop $8k




Ok this is going to kill me but has to be done 

Price drop to 8k before I part out but note turbo and grill have been sold. If I part out prices are as follow 

Enginge and box $6000

Wilwood front brakes $1000 sold pending

Tein suspension $650

Cold air induction $350

Rolling shell with complete interior $3000

Will also be putting up a list of other parts as well




Share this post

Link to post
This topic is now closed to further replies.
Sign in to follow this  
  • Create New...