|
Drivers Side. Remove overflow bottle and its mounting cradle
|
Support engine with jack between exhaust pipe and oil sump. DO NOT SUPPORT ENGINE VIA SUMP ITSELF !!! Remove main support bolt -
|
Remove 3 bolts to clear mount. Old mount with cracks.
|
Bolt mount to chassis first, then set the first bolt onto engine. Use the guide hole to lever engine and mount to align other 2
|
Gearbox/Front mount. Support this side of engine with jack.
|
|
From underneath, remove main support bolt first. Then simple take mount off side of gearbox.
|
Less damage to this one. Again, install is by reverse. Bolt mount to chassis bracket first, then get two bolts onto gearbox and
|
Rear Gearbox Mount. From above, unbolt the clutch hydraulic line support bracket. Then go UNDER it to get the main support bolt
|
With passenger-side wheel off, these two bolts come off...
|
... and this nut, to remove the mount from the bay. This mount is a bit fiddly to get out, but it does come. You might need to l
|
