s01_The Kit.jpg

s02_place in vice.jpg

s03_locknut and dies.jpg

s04_locknut and dies.jpg

s05_fit into frame.jpg

s06_position tube.jpg

s07_Mandral showing setup end.jpg

s08_place mandral into frame.jpg

s09_fit bar into frame.jpg

s10_screw mandral to locate tube correctly.jpg

s11_release tension on to mandral.jpg

s12_tighten up locknut.jpg

s13_lube the tip of the mandral with some CRC.jpg

s14_reinsert mandrel into frame.jpg

s15_engage the mandral.jpg

s16_tighten as far as you need.jpg

s17_undo locknut.jpg

s18_remove dies.jpg

s19_pull the mandrel off and finished double flare.jpg