[GTI-R Oz] « Login « Sidebar
[GTIROZ] Gallery » [GTI-R Oz] Misc » Modifications » Mounts & Bushes » Engine Mounts Install » And this one (rear gearbox) was least damaged. Install is very simple with this one. Get it into position, bolt to chassis brack
 
 
 
And this one (rear gearbox) was least damaged. Install is very simple with this one. Get it into position, bolt to chassis brack
Drivers Side. Remove overflow bottle and its mounting cradle Support engine with jack between exhaust pipe and oil sump. DO NOT SUPPORT ENGINE VIA SUMP ITSELF !!! Remove main support bolt - Remove 3 bolts to clear mount. Old mount with cracks. Bolt mount to chassis first, then set the first bolt onto engine. Use the guide hole to lever engine and mount to align other 2
Gearbox/Front mount. Support this side of engine with jack. From underneath, remove main support bolt first. Then simple take mount off side of gearbox. Less damage to this one. Again, install is by reverse. Bolt mount to chassis bracket first, then get two bolts onto gearbox and Rear Gearbox Mount. From above, unbolt the clutch hydraulic line support bracket. Then go UNDER it to get the main support bolt
With passenger-side wheel off, these two bolts come off... ... and this nut, to remove the mount from the bay. This mount is a bit fiddly to get out, but it does come. You might need to l And this one (rear gearbox) was least damaged. Install is very simple with this one. Get it into position, bolt to chassis brack

And this one (rear gearbox) was least damaged. Install is very simple with this one. Get it into position, bolt to chassis brack

Date: 27/10/03
 
 
 

Actions
Advanced Search
Create Replica

Engine Mounts Install

1. Drivers... ... 5. Gearbox/Fro... 6. From... 7. Less damage... 8. Rear... 9. With... 10. ... and... 11. And this...

Random Image

P1030016.JPG
 
 

P1030016.JPG

Powered by Gallery v2.3 © [GTI-R Oz] RNN14 Owners Club Australia 2000-2011 •