[GTI-R Oz] « Login « Sidebar
[GTIROZ] Gallery » [GTI-R Oz] Misc » Modifications » Airboxes & Intakes » Damian's » Using a template, i made got a sheety to make me a divider out of 3mm aluminium. I then drilled out the hole for the afm and th
 
 
 
Using a template, i made got a sheety to make me a divider out of 3mm aluminium. I then drilled out the hole for the afm and th
Started by enlarging hole in side of engine bay and moved fuse box forward. Covered edges of hole in rubber. Already had a 5 in Moved battery forward, screwing the tray into the body I cut one of the battery screw hooks to stop it from hitting the bonnet I then stuck piece of rubber onto the side of the battery
Using a template, i made got a sheety to make me a divider out of 3mm aluminium. I then drilled out the hole for the afm and th Screwed it together, with a new gasket between filter flange and divider, used existing o-ring between divider and afm Finished product in the car, holds itself in there tight,i just screwed a piece of angle into the body to hold the divider in pl Pretty good height, am going to hang rubber from bonnet soon to give complete seal

Using a template, i made got a sheety to make me a divider out of 3mm aluminium. I then drilled out the hole for the afm and th

Date: 04/04/04
 
 
 

Actions
Advanced Search
Create Replica

Damian's

1. Started by ... 2. Moved... 3. I cut one... 4. I then... 5. Using a... 6. Screwed it ... 7. Finished... 8. Pretty good...

Random Image

Lambo - no match for Ivan
 
 

Lambo - no match for Ivan

Powered by Gallery v2.3 © [GTI-R Oz] RNN14 Owners Club Australia 2000-2011 •